Brush machine, CNC brush tufting machine, CNC brush making machines, factory, exporter
Products Showroom
As a professional factory for brush machines in South China, Wangxinda is located in Baiyun District of Guangzhou, offering a wide range of CNC machines for making various brushes, such as plastic/wood brooms, toilet brushes, disk brushes, roller brushes and other industrial brushes, etc. Eager to find out more details about brush machinery? Start your inquiry now! It'll be our great pleasure to recommend suitable solutions to you!
It's used to make industrial strip brushes which are 2m long. With four grippers holding four strip brushes on worktable, it drills holes and tufts filaments simultaneously. With servo motors,the maximum speed is 5 holes per second.
It's used to make those big and long roller brushes with wood or plastic bases. With servo motors, the maximum speed is 5 holes per second, however, for daily use, it's suggested that operator keep the speed at about 3 holes per second, so as not to short
WXD-4A-003 is a 4-axis broom tufting machine of latest style, staple-type(using round wires). While tufting brooms, the maximum speed could be 5 holes per second, and it tufts filaments at angles. The maximum length of folded filaments is 12cm. Click to f
WXD-5A2H03 is used to make round toilet brushes with bristles in two colors. It can also make hockey-type toilet brushes, as long as operator changes grippers. The power supply could be either 3-phase 380V or 1-phase 220V, it's optional.
With a drilling head and a tufting head, WXD-5A2H02 is used to make hockey-type toilet brushes with bristles in two colors. With servo motors, the maximum speed is 5 holes per second. It could also make round toilet brushes, as long as operator changes gr
With extra-large size, with two tufting heads, WXD-4A2H02 is used to tuft big plastic brooms with long bristles. The maximum length of folded bristles allowed is 260mm, and its maximum speed is two holes per second. Other size could be customized.
WXD-3A-002 is used to tuft disc brushes, of which the plastic bases should be pre-molded with holes. Its power supply could be either 1-phase 220V or 3-phase 380V, which is optional. Its maximum tufting speed is 5 holes per second.
This WXD-5A-002 is used to make both hockey-type toilet brushes and ball-type toilet brushes with filaments in two colors. Pls note that the plastic brush bases should be pre-drilled, already with holes.
With a drilling head and a tufting head, this machine is suitable for making brushes with curved surface, including toilet brushes, plastic scrubbing brushes and some other industrial brushes.
WXD-3A-L002 is used to make big roller brushes, which has functions of both drilling and tufting, but is much shorter than WXD-3A-L001. Click to see further details about it.
It is a CNC 4-axis toilet brush tufting machine, also is suitable for tufting other fan-shaped brooms, scrubbing brushes and some industrial brushes with cambered surface, as long as operator changes clamps(grippers).
With two drilling heads, this machine is used to drill holes for various kinds of brushes with curved or flat surface, including plastic/wooden hairbrushes, toilet brushes and some other industrial brushes.
Standard Working Area of Working Table: X-axis x Y-axis x Z-axis x A-axis x H-axis = 100mm x 320mm x 100° x 40° x 120mm (Other size could be customized) It is suitable for making both wood and plastic brooms.
This is a CNC 3-axis 3-head machine, with two drilling heads and a tufting head, which drills holes and tufts filaments simultaneously. It's used to make roller brushes and cylindrical brushes. However, it can also make other brushes with curved surfaces,
This machine has functions of both drilling and tufting. With drilling head installed, it drills holes; replacing the drilling head with tufting head, it then tufts. It operates in the mode of four-location circumrotating. Only one-time installation is ne
Professional CNC long-roller machine for making big and long roller brushes, which are used for cleaning glass, marble, textile products, iron or steel products, etc.
Operator enters data for drilling positions by either "Teaching-Type" or "Digits-Type". On operation interface, operator could insert, delete, adjust, copy, separate and move holes, etc, which is quite simple and convenient.
The working voltage for 4-axis CNC wheel brush tufting machine should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics
For this brush tufting machine, two clamps are installed on working table, which work alternatively and continually. Thus there's no need to stop to change brush handles, which increases productivity
WXD-3A2H01 is used to make cylindrical wood hairbrushes, staple-type, which drills holes and tufts filaments in two colors simultaneously. The power supply could be either 3-phase 380V or single-phase 220V, it's optional.
no data
ADDRESS
No.6, Baihualing Industrial Park, Jia He Wang Gang, Baiyun District, Guangzhou, Guangdong, China.
LINKS
Home
About us
Products Showroom
Video
Information Center
About us
Products Showroom
Video
Information Center
PRODUCT
2-Axis CNC Brush
3-Axis CNC Brush Machines
4-Axis CNC Brush Machines
5-Axis CNC Brush Machines
Other Machines
CONTACT US
Contact Us 5-Axis CNC Brush Tufting Machine | 4-Axis CNC Brush Planting Machine | 3-Axis CNC Brush Filling Machine
