loading

Brush machine, CNC brush tufting machine, CNC brush making machines, factory, exporter

5-Axis CNC Brush Machines




Want to use the fewest machines to make the most brushes models? 5-Axis machines might be your best choice, so long as you have the corresponding grippers for different brushes. 5-Axis machines are very flexible, they drill holes and tuft filaments at angles, can make almost all the brushes made by 2-axis, 3-axis and 4-axis machines. In most cases, 5-axis machines are used to make wood brooms, ball-type and hockey-type toilet brushes, etc.

5 axis 5 head brush drilling and tufting machine WXD-5A5H01
The 5 axis 5 head brush drilling and tufting machine is a computer-controlled machine that can drill and tuft industrial brushes, such as toilet brushes and hockey brushes, with three drilling heads and two tufting heads. It has six grippers that hold six brushes on the working table.
Disc brush drilling and tufting machine WXD-5A3H-06
1) It is a special machine for disc brush, with double drilling head, single tufting head,
with 2 sets of fixtures on the working table.

2) The max diameter of disc brush block at 600mm.

3) Produce the disc brus at different diameter of brush bl
5-axis 3-head disc brush machine WXD-5A3H05
1) It is a special machine for disc brush, with double drilling head, single tufting head,
with 2 sets of fixtures on the working table.
2) The max diameter of disc brush block at 500mm.
3) With independent machine computer and machine body.
5 axis broom tufting machine WXD-5A-003 (Staple  type)
This is 5 axis broom tufting machine, with flexible working axis, which can tufting filament in various
of brush block item with angles. For the machine bristle box, it can network with stainless wire, coper wire, plastic bristle, tampico ect.
Cost Efficient 5-Axis 3-Head Drilling & Tufting Machine WXD-5A3H-04
The 5 axis 3 head drilling and tufting machine, with double drilling head, single tufting head, in Germany style. It is the new design with aluminum cover, which guarantee the operation security.
5 axis 3 head drilling and tufting machine WXD-5A3H-03
It can make wide range of brush once the operators changed the fixtures accordingly.
5-Axis 2-Head Broom Drilling and Tufting Machine WXD-5A2H04
WXD-5A2H04 is used to make big push brooms. The maximum length of push broom allowed is 600mm. The maximum length of filaments (outside holes) allowed is 120mm. Click to see further details about this push broom drilling and tufting machine.
5-Axis 3-Head Toilet Brush Machine WXD-5A3H02
Want to make round toilet brushes? WXD-5A3H02 could be your best choice! It can make round toilet brushes, half-round toilet brushes, and hockey-type toilet brushes, as long as operator changes grippers.
5-Axis 2-Head Toilet Brush Machine WXD-5A2H03
WXD-5A2H03 is used to make round toilet brushes with bristles in two colors. It can also make hockey-type toilet brushes, as long as operator changes grippers. The power supply could be either 3-phase 380V or 1-phase 220V, it's optional.
5-Axis 2-Head Hockey Brush Machine WXD-5A2H02
With a drilling head and a tufting head, WXD-5A2H02 is used to make hockey-type toilet brushes with bristles in two colors. With servo motors, the maximum speed is 5 holes per second. It could also make round toilet brushes, as long as operator changes gr
5-Axis Hockey-Type Toilet Brush Tufting Machine WXD-5A-002
This WXD-5A-002 is used to make both hockey-type toilet brushes and ball-type toilet brushes with filaments in two colors. Pls note that the plastic brush bases should be pre-drilled, already with holes.
5-Axis 3-Head Brush Drilling and Tufting Machine WXD-5A3H01
For this cylinder brush machine, the working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.
5-Axis 2-Head Broom Machine WXD-5A2H01
Standard Working Area of Working Table: X-axis x Y-axis x Z-axis x A-axis x H-axis = 100mm x 320mm x 100° x 40° x 120mm (Other size could be customized) It is suitable for making both wood and plastic brooms.
5-Axis Brush Drilling Machine WXD-5A-005
Operator enters data for drilling positions by either "Teaching-Type" or "Digits-Type". On operation interface, operator could insert, delete, adjust, copy, separate and move holes, etc, which is quite simple and convenient.
5-Axis Brush Tufting Machine WXD-5A-001
While using this 5-axis CNC brush tufting machine, please keep its electric box far away from magnetic field, otherwise it will be probably out of control.
no data
ADDRESS
No.6, Baihualing Industrial Park, Jia He Wang Gang, Baiyun District, Guangzhou, Guangdong, China.
Tel: 86 20 86328033 
Fax: 86 20 86328033 
Email : chloe@brushmachine1.com
LINKS
Home
About us
Products Showroom
Video
Information Center
PRODUCT
2-Axis CNC Brush
3-Axis CNC Brush Machines
4-Axis CNC Brush Machines
5-Axis CNC Brush Machines
Other Machines
CONTACT US
Contact Us 5-Axis CNC Brush Tufting Machine | 4-Axis CNC Brush Planting Machine | 3-Axis CNC Brush Filling Machine

Customer service
detect