|Standard Working Area of Working Table||
X-axis x Y-axis x Z-axis x H-axis = 350mm x 180mm x 100mm x 360°(or 30°)
(Other size could be customized)
|Material of Brush Handles||Plastic, wood|
|Diameter of Holes||1mm - 10mm|
|Maximum Drilling Speed||6 holes per second|
|Qty of Programs Saved||It saves totally 84 programs for making different brushes.|
|Specifications of Machine Body||1.5m x 1.5m x 1.4m|
|Motor (Power System)||With step-motor by default; also we could use servo-motor instead, if required by clients.|
|Programming||PLC (Programmable Logic Controller)|
|Touchable Screen||With 5.4'' touchable monitor controller; interface is in English or other language required by client, operating in dialogue-mode, which is quite simple and easy.|
|Speed Adjusting||Frequency-conversion stepless-adjustable speed|
|Data Input for Drilling Positions||
Teaching-type: Operator manually puts tufting head into each hole, one by one, the position of these holes will be saved by computer one by one. By this way, all data for tufting position has been entered and saved.
Digits-type: Operator manually enters digits(coordinates of X/Y axis) for tufting position.
|Gross Weight||Around 350KGS|
|Power Supply||3-phase 380V, or single-phase 220V, 50-60Hz, 600W|
|Replaceable Clamp||FMS type. Operator could make other kinds of brushes, as long as he changes clamps.|
It'll be packed in wooden case.
Wooden case for machine body: 1200mm x 1500mm x 1600mm
Wooden case for computer box: 600mm x 600mm x 1400mm