|Standard Working Area of Working Table||X-axis x Y-axis x Z-axis x H-axis = 680mm x 220mm x 100mm x 360°(or 30°) (Other size could be customized)|
|Material of Broom Base||Plastic or wood; with flat, corrugated or fan-shaped surface, or cylindrical shape;|
|Material of Filaments||PP, nylon, copper wire, stainless steel wire, bristle|
|Length of Filaments (Outside Holes)||10mm - 120mm|
|Diameter of Brush Filaments||0.08mm - 1.2mm|
|Diameter of Holes||2mm - 7mm|
|Colors of Filaments||Either single color or two colors|
|Maximum Tufting Speed||5 holes per second|
|Specifications of Machine Body||1.5m x 1.5m x 1.4m|
|Motor (Power System)||With step-motor by default; also we could use servo-motor instead, if required by clients.|
|Data Input for Drilling/Tufting Positions||
Teaching-type: Operator manually puts tufting head into holes one by one, then presses “Enter” on hand-controller, the position of these holes will be saved by computer one by one. By this way, all data for tufting position has been entered and saved.
Digits-type: Operator manually enters digits(coordinates of X/Y axis) for tufting position.
|Touchable Screen||With 5.4'' touchable monitor controller; interface is in English or other language required by client, operating in dialogue-mode, which is quite simple and easy.|
|Speed Adjusting||Frequency-conversion stepless-adjustable speed|
|Qty of Programs Saved||It saves totally 84 programs for making different brushes.|
|Gross Weight||Around 500KGS|
|Programming||PLC (Programmable Logic Controller)|
|Power Supply||3-phase 380V, or single-phase 220V, 50-60Hz, 600W|
|Replaceable Grippers||FMS type. Operator could make other kinds of brushes, as long as he changes grippers.|
|Tufting Mode||Either "staple-type" or "anchor-type"|
It’ll be packed into wood case.
Machine Body: 160cm(Length) x 100cm(Width) x 180cm(Height)
Computer Box: 63cm(Length) x 61cm(Width) x 145cm(Height)