Brush machine, CNC brush tufting machine, CNC brush making machines, factory, exporter
Standard Working Area of Working Table | X-axis x Y-axis x Z-axis x A-axis x H-axis = 100mm x 320mm x 100° x 40° x 120mm (Other size could be customized) |
Material of Brush Handle | Plastic or wood; with flat, corrugated or fan-shaped surface, or cylindrical shape; |
Material of Brush Filaments | PP, nylon, copper wire, stainless steel wire, bristle |
Length of Filaments (Outside Holes) | 10mm - 120mm |
Diameter of Brush Filaments | 0.08mm - 1.2mm |
Diameter of Holes | 3mm - 5mm |
Colors of Filaments | Either single color or two colors |
Maximum Tufting Speed | 5 holes per second |
Specifications of Machine Body | 2.2m(Length) x 1.6m(Width) x 2.5m(Height) |
Motor (Power System) | With step-motor by default; also we could use servo-motor instead, if required by clients. |
Data Input |
Teaching-type: Operator manually puts tufting head into holes one by one, then presses “Enter” on hand-controller, the position of these holes will be saved by computer one by one. By this way, all data for tufting position has been entered and saved. Digits-type: Operator manually enters digits(coordinates of X/Y axis) for tufting position. |
Touchable Screen | With 5.4'' touchable monitor controller; interface is in English or other language required by client, operating in dialogue-mode, which is quite simple and easy. |
Speed Adjusting | Frequency-conversion stepless-adjustable speed |
Qty of Programs Saved | It saves totally 84 programs for making different brushes. |
Gross Weight | Around 2500KGS |
Programming | PLC (Programmable Logic Controller) |
Power Supply | 3-Phase 380V, or Single-Phase 220V; 50-60Hz; 600W |
Replaceable Grippers | FMS type. Operator could make other kinds of brushes, as long as he changes grippers. |
Tufting Mode | Staple-type (using round wires) |
Packing |
It’ll be packed into wood cases. Machine Body: 2.2m(Length) x 1.6m(Width) x 2.5m(Height) Computer Box: 63cm(Length) x 61cm(Width) x 145cm(Height) |