Brush machine, CNC brush tufting machine, CNC brush making machines, factory, exporter
Products Showroom
As a professional factory for brush machines in South China, Wangxinda is located in Baiyun District of Guangzhou, offering a wide range of CNC machines for making various brushes, such as plastic/wood brooms, toilet brushes, disk brushes, roller brushes and other industrial brushes, etc. Eager to find out more details about brush machinery? Start your inquiry now! It'll be our great pleasure to recommend suitable solutions to you!
Standard Working Area of Working Table: X-axis x Y-axis x Z-axis x A-axis x H-axis = 100mm x 320mm x 100° x 40° x 120mm (Other size could be customized) It is suitable for making both wood and plastic brooms.
With two drilling heads and a tufting head which work simultaneously, this 4-axis 3-head integrated machine is used to make hairbrushes, toilet brushes, industrial roller brushes and fan-shaped brooms, etc.
This is a CNC 3-axis 3-head machine, with two drilling heads and a tufting head, which drills holes and tufts filaments simultaneously. It's used to make roller brushes and cylindrical brushes. However, it can also make other brushes with curved surfaces,
The working table of this scrubbing brush making machine is composed of straight-line guide rail and ball screw with high precision, which is quite stable and durable
With two drilling heads and a tufting head, this 2-axis 3-head brush machine is used to make plastic scrubbing brushes, plastic/wooden brooms and some other brushes with flat-surface.
With a drilling head and a tufting head, this machine is suitable for making brushes with flat-surface, including plastic scrubbing brushes, wooden or plastic broom, and some other industrial brushes.
With step-motor by default; also we could use servo-motor instead, if required by clients. The working table of this broom making machine is composed of straight-line guide rail and ball screw with high precision, which is quite stable and durable.
Operator enters data for toothbrush tufting positions by either "Teaching-Type" or "Digits-Type". On operation interface, operator could insert, delete, adjust, copy, separate and move holes, which is quite simple and convenient.
This machine has functions of both drilling and tufting. With drilling head installed, it drills holes; replacing the drilling head with tufting head, it then tufts. It operates in the mode of four-location circumrotating. Only one-time installation is ne
While using this 4-axis drilling machine, pls be sure that all cables connect correctly. Red, blue and yellow cables connect with 380V three-phase wires, green cable connects with neutral wire, yellow-green cable connects with earth wire.
Application: for cutting plastic threads
Specification: 60cm(Length) x 40cm(Width) x 60cm(Height)
Maximum Cutting Diameter: Customized
Application: Flat-surface brush
Specification: 60cm(Length) x 40cm(Width) x 60cm(Height)
WXD-TM100 is used to trim the end of brush filaments, so as to keep the end flat. The blades are made of imported steel with excellent tenacity, being abrasion-resistant. It is not allowed to trim brushes with metal wires.
Professional CNC long-roller machine for making big and long roller brushes, which are used for cleaning glass, marble, textile products, iron or steel products, etc.
Operator enters data for drilling positions by either "Teaching-Type" or "Digits-Type". On operation interface, operator could insert, delete, adjust, copy, separate and move holes, etc, which is quite simple and convenient.
While using this 5-axis CNC brush tufting machine, please keep its electric box far away from magnetic field, otherwise it will be probably out of control.
Please note that there is high-voltage electricity inside electric box of this universal 4-axis brush making machine. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle
The working voltage for 4-axis CNC wheel brush tufting machine should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics
For this brush tufting machine, two clamps are installed on working table, which work alternatively and continually. Thus there's no need to stop to change brush handles, which increases productivity
WXD-3A2H01 is used to make cylindrical wood hairbrushes, staple-type, which drills holes and tufts filaments in two colors simultaneously. The power supply could be either 3-phase 380V or single-phase 220V, it's optional.
no data
ADDRESS
No.6, Baihualing Industrial Park, Jia He Wang Gang, Baiyun District, Guangzhou, Guangdong, China.
LINKS
Home
About us
Products Showroom
Video
Information Center
About us
Products Showroom
Video
Information Center
PRODUCT
2-Axis CNC Brush
3-Axis CNC Brush Machines
4-Axis CNC Brush Machines
5-Axis CNC Brush Machines
Other Machines
CONTACT US
Contact Us 5-Axis CNC Brush Tufting Machine | 4-Axis CNC Brush Planting Machine | 3-Axis CNC Brush Filling Machine
Copyright © 2024 Guangdong Wangxinda Machines Co., Ltd. |Sitemap
