English

5-axis 3-head disc brush machine WXD-5A3H05

5-axis 3-head disc brush machine WXD-5A3H05
5-axis 3-head disc brush machine WXD-5A3H05
prev
  • 5-axis 3-head disc brush machine WXD-5A3H05
next
  • 5-axis 3-head disc brush machine WXD-5A3H05
  • Country: China
  • Payment: L/C, D/P, T/T
  • Price: FOB, CIF
  • Inquire Online

Product Information




Features of 5-axis 3-head disc brush machine WXD-5A3H05

1) It is a special machine for disc brush, with double drilling head, single tufting head, 
with 2 sets of fixtures on the working table. 

2) The max diameter of disc brush block at 500mm. 

3) With independent machine computer and machine body. 

4) Drilling holes and tufting filament at with angles synchronously.

5) With PLC controller, customers can make the program for different brush accordingly. 

Technical Parameter for 5-axis 3-head disc brush machine WXD-5A3H05

 Standard Working Area of Working Table  X-axis x Y-axis x Z-axis x H-axis x A-axis = 500mm x 180mm x 100mm x 360°(30°for forward/backward movement and left/right movement)
 Material of Brush Handle  Plastic, wood; with flat, corrugated or fan-shaped surface, or roller-type, or with non-standard shape
 Material of Brush Filaments  PP, nylon, copper wire, stainless steel wire, bristle
 Length of Filaments (Outside Holes)  10mm - 120mm
 Diameter of Brush Filaments  0.08mm - 1.2mm
 Diameter of Holes  3mm - 6mm
 Colors of Filaments   Either single color or two colors
 Maximum Tufting Speed  5 holes per second
 Specifications of Machine Body  1.92m x 1.82m x 2.24m
 Motor (Power System)  With Panasonic servo-motor 
 Data Input for Tufting Positions                                      Teaching-type: Operator manually puts tufting head into each hole, one by one, the position of these holes will be saved by computer one by one. By this way, all data for tufting position has been entered and saved. 

Digits-type: Operator manually enters digits(coordinates of X/Y axis) for tufting position.
 Touchable Screen With 5.4'' touchable monitor controller; interface is in English or other language required by client, operating in dialogue-mode, which is quite simple and easy.
 Speed Adjusting  Frequency-conversion stepless-adjustable speed
 Qty of Programs Saved  It saves totally 84 programs for making different brushes.
 Gross Weight  Around 1300KGS
 Programming  PLC (Programmable Logic Controller)
 Power Supply  3-phase 380V, 1200W
 Replaceable Clamp  FMS type. Operator could make other kinds of brushes, as long as he changes clamps.
 Tufting Mode  staple type
 Packing  It'll be packed in wooden case.
 Wooden case for machine body: 2000mm x 1900mm x 2300mm
 Wooden case for computer box: 680mm x 680mm x 1540mm






Messages

Message boardmin&max