- About us
- Products Showroom
- Information Center
- Contact Us
|Standard Working Area of Working Table|| X-axis x Y-axis x Z-axis = 350mm x 180mm x 360°
(Other size could be customized)
|Material of Brush Handles||Plastic, wood|
|Diameter of Holes||1mm - 10mm|
|Maximum Drilling Speed||6 holes per second|
|Qty of Programs Saved||It saves totally 84 programs for making different brushes.|
|Specifications of Machine Body||1.5m x 1.5m x 1.4m|
|Motor (Power System)||With step-motor by default; also we could use servo-motor instead, if required by clients.|
|Programming||PLC (Programmable Logic Controller)|
|Touchable Screen||With 5.4'' touchable monitor controller; interface is in English or other language required by client, operating in dialogue-mode, which is quite simple and easy.|
|Speed Adjusting||Frequency-conversion stepless-adjustable speed|
|Data Input for Drilling Positions||Teaching-type: Operator manually puts drilling head into holes one by one, then presses “Enter” on hand-controller, the position of these holes will be saved by computer one by one. By this way, all data for drilling position has been entered and saved.
Digits-type: Operator manually enters digits(coordinates of X/Y axis) for tufting position.
|Gross Weight||Around 250KGS|
|Power Supply||3-phase 380V, or single-phase 220V, 50-60Hz, 600W|
|Replaceable Clamp||FMS type. Operator could make other kinds of brushes, as long as he changes clamps.|
|Packing|| It'll be packed in wooden case.
Wooden case for machine body: 1000mm x 1200mm x 1600mm
Wooden case for computer box: 600mm x 600mm x 1400mm