- About us
- Products Showroom
- Information Center
- Contact Us
Features of 4-Axis 2-Head Broom Tufting Machine WXD-4A2H05:
1) With two tufting heads, WXD-4A2H05 tufts filaments simultaneously. It makes many kinds of flat brooms, as long as operator changes grippers. Please note that only a set of grippers is offered together with the machine, free of charge, other extra grippers will be charged.
2) With servo motors, the maximum speed is 5 holes per second. Due to different length of filament outside holes.
3) With three grippers holding three brushes on working table. With automatic vacuum cleaner and automatic lubrication system.
4) With 5.4'' touchable screen, the interface is available in various languages, such as Chinese, English, Spain, Russian, etc, as required by customers.
5) With PLC(Programmable Logic Controller), which operates precisely, with excellent stability.
6) Operator sets up programmings under either "Teach-Mode" or "Parameter-Mode". On the screen, operator could insert, delete, adjust, copy, separate and move holes, which is quite simple and convenient.
Technical Parameter for 4-Axis 2-Head Broom Tufting Machine WXD-4A2H05:
|Standard Working Area of Working Table||X-axis x Y-axis = 400mm x 200mm (Other size could be customized)|
|Material of Brush Handle||Plastic or wood|
|Material of Brush Filaments||PP, nylon, copper wire, stainless steel wire, bristle, horse hair|
|Length of Filaments (Outside Holes)||10mm - 200mm|
|Diameter of Brush Filaments||0.08mm - 1.2mm(plastic)|
|Diameter of Holes||3mm - 7mm|
|Colors of Filaments||Either single color or two colors|
|Maximum Tufting Speed||5 holes per second|
|Specifications of Machine Body||1.6m(Length) x 1.5m(Width) x 1.5m(Height)|
|Motor (Power System)||Servo motors|
Teach-Mode: Operator manually puts tufting head into holes one by one, then presses “Enter” on hand-controller, the position of these holes will be saved by computer one by one. By this way, all data for tufting position has been entered and saved.
Parameter-type: Operator manually enters digits for several columns.
|Touchable Screen||With 5.4'' touchable monitor controller; interface is in English or other language required by client, operating in dialogue-mode, which is quite simple and easy.|
|Speed Adjusting||Frequency-conversion stepless-adjustable speed|
|Qty of Programs Saved||It saves totally 84 programs for making different brushes.|
|Gross Weight||Around 400KGS|
|Programming||PLC (Programmable Logic Controller)|
|Power Supply||Either 1-phase 220V or 3-phase 380V; 50-60Hz; 600W|
|Replaceable Grippers||FMS type. Operator could make other kinds of brushes, as long as he changes grippers.|
|Tufting Method||Staple-type, using round wires|
It’ll be packed into wood cases.
Machine Body: 1.62m(Length) x 1.52m(Width) x 1.52m(Height)
Computer Box: 70cm(Length) x 70cm(Width) x 150cm(Height)