English

2-Axis 5-Head Cloth Brush Drilling & Tufting Machine WXD-2A5H01.

2-Axis 5-Head Cloth Brush Drilling & Tufting Machine WXD-2A5H01.
2-Axis 5-Head Cloth Brush Drilling & Tufting Machine WXD-2A5H01.
prev
  • 2-Axis 5-Head Cloth Brush Drilling & Tufting Machine WXD-2A5H01.
next
  • 2-Axis 5-Head Cloth Brush Drilling & Tufting Machine WXD-2A5H01.
  • Minimum: 1 Set
  • Delivery: 50 days after deposit
  • Model: WXD-2A5H01
  • Country: China
  • BrandName: Wangxinda
  • Package: wooden case
  • Payment: L/C, D/P, T/T
  • Price: FOB, CIF
  • Inquire Online

Product Information





Features of 2-Axis 5-Head Cloth Brush Drilling & Tufting Machine WXD-2A5H01.

1) The WXD-2A5H01, with three drilling head, double tufting head, in Germany style. 
With special fixture design for cloth brush, there is six sets of gripper in the working table, 
in each gripper, it can fix 4 PCS of cloth brush block. 

2) Drilling holes and tufting filament straightly, drilling holes and tufting filament synchronously.

3) For the cloth brush, max working speed is 7 holes per second. 

4) It can produce wide range of flat brush if the operators change the fixtures accordingly. 

5) With PLC program, the clients can make program for different brush item according to their 
requirement in the machine " Teach- Mode". 

Technical Parameter for 2-Axis 5-Head Cloth Brush Drilling & Tufting Machine WXD-2A5H01.

 Standard Working Area of Working Table  X-axis x Y-axis = 400mm x 200mm (Other size could be customized)
 Material of Brush Handle  Plastic or wood
Material of Brush Filaments  PP, nylon, copper wire, stainless steel wire, bristle, horse hair
 Length of Filaments (Outside Holes)  10mm - 120mm
 Diameter of Brush Filaments  0.08mm - 1.2mm(plastic) , max.0.5mm (steel wire)
 Diameter of Holes  3mm - 5mm
 Colors of Filaments   Either single color or two colors
 Maximum Tufting Speed  7 holes per second
 Specifications of Machine Body  1.72m(Length)  x 1.5m(Width) x 1.8m(Height)
 Motor (Power System)  Panasonic Servo motors
 Data Input  Teach-Mode: Operator manually puts tufting head into holes one by one, then presses “Enter” on hand-controller, the position of these holes will be saved by computer one by one. By this way, all data for tufting position has been entered and saved.

 Parameter-type: Operator manually enters digits for several columns.
 Touchable Screen With 5.4'' touchable monitor controller; interface is in English or other language required by client, operating in dialogue-mode, which is quite simple and easy.
 Speed Adjusting  Frequency-conversion stepless-adjustable speed
 Qty of Programs Saved  It saves totally 84 programs for making different brushes.
 Gross Weight  Around 750KGS
 Programming  PLC (Programmable Logic Controller)
 Power Supply  Either 1-phase 220V or 3-phase 380V; 50-60Hz; 800W
 Replaceable Grippers  FMS type. Operator could make other kinds of brushes, as long as he changes grippers.
 Tufting Method Anchor-type, using flat wires
 Packing  It’ll be packed into wood cases.
 Machine Body: 1.8m(Length)  x 1.58m(Width) x 1.95m(Height) 
 Computer Box: 0.68m(Length) x0.68m(Width) x 1.5m(Height)

Messages

Message boardmin&max