FAQs about Operation

• After I purchase machine from you, what if I don't know how to operate?

  12/11/2009
  
  Pls don't worry. After we finish your machine, you are warmly welcome to our factory to learn how to operate the machine, you could just stay in the factory as long as you like, until you think you get familiar with the machines.
  
  
  

• How many programs can the computer save?

  12/1/2009
  
  Generally, it saves totally 84 programs for making different brushes. However, pls contact us for confirmation for specified machines.
  
  

• How to turn on/off the machine?

  1/18/2010
  
  To turn on the machine, pls follow the below steps:
  Press "On" → Switch On the Computer.
  
  To turn off the machine, pls follow the below steps:
  Switch Off the Computer → Press "Off" (pls always remember to switch off the computer before pressing "Off")
  
   

• What is "Origin"?

  1/18/2010
  
  "Origin" stands for Machine Coordinate Origin.
  
  After pressing “Origin”, the machine head will lift, all Axes will return back to the position of coordinate origin.
  
  Pls always remember to press "Origin" before production or revising data.
  
  

• How is the requirement of air compressor?

  2/9/2010
  
  For these brush making machines, you'll just need an air compressor which generates pressure around 6 kgs/cm2 ~ 8 kgs/cm2, equal to 85.35 psi ~ 113.80 psi.
  
  Unit of Pressure: 1 psi (Pounds per square inch) = 0.0703 kg/cm2
  
  

• How many brushes models can a machine make?

  3/6/2010
  
  Theoretically, a machine can make a great many brushes models, as long as operator changes clamp(gripper). One model, one clamp.
  
  Clamp(gripper) is a device made of aluminum-alloy, which is used to hold the brush base and fix it on working table of the machine, while drilling or tufting, as below:
   
  
  
  ..

• Does it take a long time to set up a new program, pls?

  5/7/2010
  
  It depends.
  
  If the holes are averagely arranged in line, taking cylindrical brush as an example, operator could just use "Insert" function to set up program, which takes only a few minutes, quite fast.
  
  If the holes are arranged in irregular shape, operator needs to manually set the position for each hole, one by one, which indeed takes much more time.
  

• What do I do if I want to change a new tufting needle?

  5/12/2010
  
  Pls remember to slightly grind the new tufting needle before you use it, so as to let the needle fit the bristle-mouth very well, otherwise the needle which doesn't fit bristle-mouth will easily cause problems during production.
  
  

12