FAQs about Machines

• How to maintain the machines?

  2009-12-11
  
  1) Operator should often add lubricating oil to the working parts of the tufting machinery, so as to decrease abrasion.
  
  2) Operator should regularly check each part to see whether there are loose screws or not, and please make sure to tighten it, if he finds a loose one.
  
  3) Please keep guide rail and ball screw clean, and make sure that there are no scraps sticking..

• What are the consumable spare parts for your staple-type machines?

  2010-9-27
  
  Those major consumable spare parts for our staple-type tufting machines are listed as below:
  
  Wire-Feeding Block Wire-Cutting Blade     Wire-Guiding Block Brist..

• Having no idea how to select a suitable brush machine?

  2011-3-10
  
  Read the tips below, they might help you.
  
  1) For plastic broom, of which the plastic base has been molded with holes:
  
  If the surface to be tufted is horizontally flat, a 2-axis tufting machine is recommended;
  
  If the surface to be tufted is curved, a 3-axis or 4-axis tufting machine is suggested.
  
  2) For plastic broom, of which the plastic b..

123