FAQ

• Having no idea how to select a suitable brush machine?

  3/10/2011
  
  Read the tips below, they might help you.
  
  1) For plastic broom, of which the plastic base has been molded with holes:
  
  If the surface to be tufted is horizontally flat, a 2-axis tufting machine is recommended;
  
  If the surface to be tufted is curved, a 3-axis or 4-axis tufting machine is suggested.
  
  2) For plastic broom, of which the plastic b..

• I have other goods from different suppliers, could you help me arrange shipment for the other goods, together with your machines, please?

  3/10/2011
  
  Dear sir/madam, yes, no problem, it'll be our pleasure to arrange the shipment for you, together with our machines.
  
  

• What are the consumable spare parts for your staple-type machines?

  9/27/2010
  
  Those major consumable spare parts for our staple-type tufting machines are listed as below:
  
  Wire-Feeding Block Wire-Cutting Blade     Wire-Guiding Block Brist..

• How to change the quantity of bristles tufted into holes, pls?

  7/8/2010
  
  Pls check the bristle-picker on your machine at first.
  
  Bristle-pickers are like these:
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  Bristle-picker takes bristles out from the bristle-box and conveys them to the bristle-mouth to be tufted into holes.
  
  
  
  
  
  ..

• What do I do if I want to change a new tufting needle?

  5/12/2010
  
  Pls remember to slightly grind the new tufting needle before you use it, so as to let the needle fit the bristle-mouth very well, otherwise the needle which doesn't fit bristle-mouth will easily cause problems during production.
  
  

• Where do you export, pls?

  5/10/2010
  
  Our factory is located in Baiyun District of Guangzhou, generally speaking, we export these brush making equipment from Guangzhou, "Place of Receipt" stated on B/L is Guangzhou.
  
  However, some customers have special requirements, so, we could also deliver the machines to Shenzhen or other places requested by clients.
  
  Pls do not hesitate to contac..

• Do you offer door-to-door service, pls?

  5/7/2010
  
  As we cann't control the relevant charges incurred at destination port, so, we are afraid we cannot offer door-to-door service.
  
  

• Does it take a long time to set up a new program, pls?

  5/7/2010
  
  It depends.
  
  If the holes are averagely arranged in line, taking cylindrical brush as an example, operator could just use "Insert" function to set up program, which takes only a few minutes, quite fast.
  
  If the holes are arranged in irregular shape, operator needs to manually set the position for each hole, one by one, which indeed takes much more time.
  

123456 Next