Home > /FAQList.htm

FAQ

  • How is the tufting speed? Drilling speed?

    11/24/2009

    The maximum drilling speed is 6 holes per second, the maximum tufting speed is also 6 holes per second.

    However, the speed will be affected by the diameter of holes, the gap between every two holes and the length of bristles. Thus, generally, the range is from 3 holes to 6 holes per second.


  • Do you arrange shipment for the machines, pls?

    11/24/2009

    Yes, dear esteemed customers, for FOB or CIF price, we will arrange shipment for you. For EXW price, clients need to arrange shipment by themselves or their agents.


  • What's the tufting method?

    11/24/2009

    The tufting method could be either "flat wire(anchor-type)" or "round wire(staple-type)".


  • How is the diameter of holes? And depth?

    11/23/2009

    Generally, the diameter of holes could be from 2mm to 8mm, while the depth of holes could be from 5mm to 12mm. For other bigger or smaller specification, pls contact us for confirmation.


  • How is the diameter of brush filaments?

    11/23/2009

    Generally speaking, the diameter of brush filaments could be from 0.08mm to 1.2mm. For other thinner or thicker filaments, pls contact us for confirmation.


    Others:
    1) Click here to see history of PVC;
    2) Click here to learn information about bristles;
    3) Click here to see polymer fibers;
    4) Click here to see natural fibers;
    5) Click here to ..

  • How is the length of brush filaments?

    11/23/2009

    The length of brush filaments could be from 8mm to 120mm, outside holes.


    Others:
    1) Click here to see history of PVC;
    2) Click here to learn information about bristles;
    3) Click here to see polymer fibers;
    4) Click here to see natural fibers;
    5) Click here to learn further details about fiber;


  • Which kind of material can I use for brush filaments?

    11/23/2009

    For the material of brush filaments, operator could use plastic, PP, PVC, PET, nylon, pig bristles, horse hair, or copper wires, stainless steel wires, etc.


    Others:
    1) Click here to see history of PVC;
    2) Click here to learn information about bristles;
    3) Click here to see polymer fibers;
    4) Click here to see natural fibers;
    5) Click here to..

  • What is the "clamp" mentioned in your product information?

    11/9/2009

    "Clamp(gripper)" is a kind of mould made from auminum-alloy, which holds the whole brush base and fixes it on working table of the machine, like this:

      




    For making different brushes, operator will need to use different clamps.

    However, only a set of clamp(s) will be offered together with the machine, fre..

FAQ

FAQs about Shipment

FAQs about Machines

FAQs about Operation

FAQs about Brush Filaments

Products

2-Axis CNC Brush Machines (8)

3-Axis CNC Brush Machines (9)

4-Axis CNC Brush Machines (9)

5-Axis CNC Brush Machines (9)

Other Machines (10)



CNC machining centers are available in a wide variety of sizes and features. 

Maximum spindle speeds are usually in the range of 4000 to 8000 R/Min, and some are as high as 75000 R/Min for special applications using small-diameter cutters. Modern spindles can accelerate to a speed of 20000 R/Min in only 1.5 seconds.

Some pallets are capable of supporting workpiece weighing as much as 7000KGS, although even higher capacities are available for special applications.

Machining centers generally requires significant capital expenditure, so to be cost effective, they may have to be used for more than one shift per day. Consequently, there must be a sufficient and continued demand for parts to justify this purchase.

Because of their inherent versatility, however, CNC machining centers can be used to produce a wide range of products, particularly for just-in-time manufacturing.
 
Interested in more details about CNC machines? Pls click here to see how to select type and sizes of CNC machining centers, and do not hesitate to leave us your message for any further inquiry.