Category: --Other Machines-- --3-Axis CNC Brush Machines-- --4-Axis CNC Brush Machines-- --5-Axis CNC Brush Machines-- --2-Axis CNC Brush Machines-- Search By:

5-Axis CNC Brush Machines

This 5-axix CNC brush tufting machine is suitable for making brushes with flat surface or cambered surface, of which the handles are made of plastic or wood. Actually it can make almost all kinds of brushes sold in the market. It's the most flexible one.

• 

  5-Axis 5-Head Brush Drilling and Tufting Machine WXD-5A5H01

  This is a CNC 5-axis 5-head integrated machine, with three drilling heads and two tufting heads, with six grippers holding six brushes on the working table. It makes wood brooms, toilet brushes and so..

• 

  5-Axis Hockey-Type Toilet Brush Tufting Machine WXD-5A-002

  This WXD-5A-002 is used to make both hockey-type toilet brushes and ball-type toilet brushes with filaments in two colors. Pls note that the plastic brush bases should be pre-drilled, already with hol..

• 

  5-Axis Brush Drilling Machine WXD-5A-005

  Operator enters data for drilling positions by either "Teaching-Type" or "Digits-Type". On operation interface, operator could insert, delete, adjust, copy, separate and move holes, etc, which is quit..

• 

  5-Axis Brush Tufting Machine WXD-5A-001

  While using this 5-axis CNC brush tufting machine, please keep its electric box far away from magnetic field, otherwise it will be probably out of control.

• 

  5-Axis 2-Head Brush Drilling and Tufting Machine WXD-5A2H01

  Standard Working Area of Working Table: X-axis x Y-axis x Z-axis x H-axis x A-axis = 350mm x 180mm x 100mm x 360°(30°for forward/backward movement and left/right movement)

• 

  5-Axis 3-Head Brush Drilling and Tufting Machine WXD-5A3H01

  For this cylinder brush machine, the working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.

1